| |||||||||||||||||||||||||||||||||
|
Diesel and Gas Engines: Add 2 ounces per litre of engine displacement or two ounces per litre of oil whichever is less for the first 15,000 miles (24,000 KM) or 500 operational hours. Add one ounce per litre of engine displacement or one ounce per litre every 15,000 miles (24,000 KM) or 500 hours thereafter. Add MILITEC- 1 every 1,000 hours of operation if the oil is not changed. Oil change and MILITEC-1 intervals can be extended if the recommended time for oil analyses indicate conditions "normal." Transmissions (Manual): Add 2 ounces per litre of fluid every 1,000 hours of operation or 30,000 miles (48,000 KM). Transmissions (Automatic): Add 1 ounce per litre of fluid every 1,000 hours of operation or 30,000 miles (48,000 KM). Differentials: Add 1 ounce per litre of oil every 1,000 hours of operation or 30,000 miles (48,000 KM). Power Steering: Add 1 ounce per litre of fluid every 1,000 hours of operation or 30,000 miles (48,000 KM). Wheel Bearings: Coat metal surface with thin film of MILITEC-1 before packing with grease containing 10% to 15% MILITEC-1 or use MILITEC-1 Grease. Gearboxes, Fluid Drivers, Speed Reducers: Add 2 ounces per quart/litre of primary lubricant every 1,000 hours of operation or 30,000 miles (48,000 KM). For large sumps with extra large oil reservoirs and oil coolers, add 1 ounce per quart/litre every 1,500 hours of operation. Air Compressors: Add 3 ounces per quart/litre of primary lubricant for the first 1,000 operational hours. Subsequent applications, add 1 ounce per quart/litre of primary lubricant. Apply each oil change or every 1,000 hours whichever is greater, not to exceed 1,500 operational hours. Refrigeration, Air Conditioners: Add 1/4 ounce per ton of refrigeration capacity. Hydraulics: Add 8 ounces to every 5 gallons of hydraulic fluid every 1,000 hours of operation. Metal Working Applications: Apply a film to all metal working surface zones. Soluble Oil Fluids: Add 10% to fluid; top off fluid ratios add 5%. Chains, Couplers: Apply a film to all metal working surface areas. Click for Automotive, Motorcycle or Two-Cycle Ratios
|
© 1987 - 2005 Militec Inc, Waldorf, Maryland. This site © 2005 Dewitte Limited (Authorised UK Distributor) | |||||||||||||||||||||||||||||||
